Cedima Diamond Blades
For more info and orders: Call Kaj Löfman +358 40 586 2081
 |
A1 Super Turbo Diamond Blade concrete, reinforced concrete, artifi cial stone, natural stone, hard clinkers, grey cast iron premium blade with very high cutting speed |
 |
AR Series Diamond Blades concrete, reinforced concrete, washed-out concrete, artifi cial and natural stone, concrete full brick, curb stones, paving concrete |
 |
CA-3 Series Diamond Blades asphalt, floor finish, lime sand-stone (gross density < 2), poroton, porous refractory material, aerated concrete, sand-stone, clay bricks |
 |
AR Turbo Diamond Blade concrete, reinforced concrete, washed-out concrete, paving concrete, roof tiles, curb stones, artifi cial stone |
 |
FC-10 Diamond Blade concrete, paving concrete, curb stones. |
 |
Fliese Diamond Blade tiles, glazed tiles, ceramics |
 |
Fliese Premium Diamond Blade tiles, glazed tiles, ceramics, stoneware, refractory material vitreous. |
 |
Ring Saw Accessories concrete, reinforced concrete, asphalt, aerated concrete, masonry. |
 |
TSCE-Beton Diamond Blade concrete, washed-out concrete, curb stones, concrete full brick |
 |
TSCE-Granit Diamond Blade granite and other hard artifi cial and natural stones, marble, heavy ceramics. |
 |
TSCE-Keramik 3 Diamond Blade ceramics, tiles, glazed tiles, thin natural stone slabs. |
 |
TSCE-KS-3 Diamond Blade Poroton, aerated concrete, lime sand-stone (gross density > 2), abrasive natural stones. |
 |
TSCE-Poroton Diamond Blade Poroton, aerated concrete, lime sand-stone (gross density < 2), abrasive natural stones. |
 |
TURBO 2009 Diamond Blade Product description goes here. |
 |
AR Super Milling Diamond Blade for milling joints of 8 bzw. 10 mm width in concrete with joint cutters up to 10 kW |
 |
CA Super Milling Diamond Blade for milling joints of 8 bzw 10 mm width in asphalt and floor finish with joint cutters up to 10 kW. |
 |
ACE-22 Diamond Blade asphalt and fl oor fi nish with soft to medium-hard aggregates |
 |
ACE-44 Diamond Blade separation cuts in asphalt with medium-hard aggregates, high feed |
 |
ACE-52.3 Diamond Blade separation cuts in asphalt with soft to hard aggregates |
 |
BCE-23.2 Diamond Blade cured concrete, reinforced concrete, washed-out concrete, curb stones |
 |
BCE-36.1 SA Diamond Blade separation cuts in cured concrete with hard aggregates and high shares of reinforcement |
 |
BCE-39.1 SA Diamond Blade separation cuts in cured concrete with medium-hard to hard aggregates and high shares of reinforcement |
 |
BCE-54 SA Diamond Blade separation cuts in cured concrete with medium-hard aggregates and high shares of reinforcement |
 |
BCE-60 SA Diamond Blade separation cuts in cured concrete with very hard aggregates and high shares of reinforcement |
 |
FBC-HB-2 Diamond Blade slot cuts in green concrete and hall floors, also with steel fibres |
 |
FBC-HB-2 K Diamond Blade slot cuts in hall fl oors, also with steel fi bres or in green concrete with hard aggregates on joint cutters of approx. 10 kW and upwards |
 |
FBC-HB-3 Diamond Blade slot cuts in green concrete and hall fl oors, also with steel fi bres |
 |
FBC-HB-3 K Diamond Blade slot cuts in hall fl oors, also with steel fi bres or in green concrete with abrasive aggregates on joint cutters of approx. 15 kW and upwards |
 |
FBC-HB-4 K Diamond Blade slot cuts in hall floors, also with steelfibres or in green concrete with extremely abrasive aggregates on joint cutters of approx. 15 kW and upwards |