| Grain Sizes | |
|---|---|
| 4 knives | < 450 mm |
| 5 knives | < 350 mm |
| 6 knives | < 250 mm |
| 7 knives | < 150 mm |
| Capacity per hour | |
|---|---|
| House waste | up to 50 t |
| Industrial waste | up to 20 t |
| Bulky waste | up to 20 t |
| Wood | up to 30 t |
1000 S (Static) shredder
Shredding power
The M&J 1000S is a stationary shredder with two powerful shafts that
run asynchronously and in both directions. The interaction between
these two shafts moves the input material around, avoiding bridging
and ensuring maximum throughput.
It is the smallest design in our range, with a capacity of 8–50 tons/hour
depending on input, the number of knives specified for the cutting table,
and the feed set-up.
The modular design makes it easy to adapt M&J 1000S shredders to meet
specific operating requirements in new and existing plants. The combination
of relatively small size and highly robust efficiency makes this shredder
very versatile. This means you can use it for shedding an unusually
wide range of inputs, even though it is designed for stationary installation.
More info: Chris Wegelius +358 40 501 9826
| Overview of specification | ||
| Overall dimension min. (L x W x H) | 7500 x 2100 x 2425 mm | |
| Weight in total | 13.7-14.6 ton | |
| Standard color | RAL 2011 - Deep orange, | |
| Loading height (with/without hopper) | 2500 / 3000 mm | |
| Power pack | ||
| Electric motor | 2 x 55 kW / 2 x 75 kW / 2 x 90 kW | |
| Electric control unit | PLC | |
| Drive principle | Double hydrostatic transmission | |
| Weight | 3 ton | |
| Cutting table | ||
| Number of shafts | 2 - Asynchronous drive | |
| Rotating speed (standard/HDC power pack) | 25-37 rpm / 25-52 rpm | |
| Number of knives | 2 x 4 / 5 / 6 / 7 | |
| Number of counter knives | 2 x 8 / 10 / 12 / 14 | |
| Cutting area (L x W) | 1574 x 1500 mm | |
| Weight | 8.1-9 ton | |
| Chassis | ||
| Standard belt conveyor (L x W) | 2500 x 1000 mm | |
| Discharge height | 530 mm | |
| Discharge width | 1000 mm | |
| Weight (incl. Conveyor) | 2.4 ton | |