| Larger Radiation Disk | Compared to our regular VAL6 series, the radiation disk is 20% larger. Because of this, the EPX is able to radiate the infrared heat to objects further wider away. |
| Built in Heater for Fuel Line | As ambient temperature decreases, viscosity increases, to counterbalance this effect, a heater is built into the fuel line to keep the fuel moving smoothly. |
| Long Operational Time | With a 58 liter (15.4 gallons) tank, the EPX is able to operate continously for 20 hrs with low output setting and 15 hrs with high output setting which enables it operate all night without refueling. |
| Sunlight Warmth | VAL6's radiant heat penetrates evenly on and into surfaces just like sunlight. |
| Best choice for outdoors | VAL6's performance is unique in the outdoors and unlike forced air heaters, whichlose heat from wind and cold air. |
| No air movement Dust Free | VAL6 generates straightforward infrated heat which is unaffected by air flow, thus creating a comfortable and dust-free environment. |
| Odorless | VAL6's perfect combustion system produces no odor and no smole while running. The exaust gas goes upward. |
< Shizuoka Seiki infrared heaters
VAL6 EPX infrared heater
EPX is the most powerful yet efficient VAL6 heater with the enlarged combustion chamber or disk and improved atomization.
This feature has unmathed value providing many applications.
The VAL6 an start up or shut off in seconds and reaches peak efficiency in less than a minute. Since the VAL6 doesn't lose heat to the air, it uses less fuel and BTU's to go way beyond the comfort level of any standard poratble heater.
The VAL6 can be used both as a heater and dryer. its rugged construction enables it to provide dependable service anywhere. Indoors, outdoors, factories, warehouses, construction sites, "When you want the very best" request the VAL6
More info and orders: Kaj Löfman +358 40 586 2081 / Chris Wegelius +358 40 501 9826
| VAL6 EPX | ||
| Heat Output | High | 35000kcal (40kW) |
| Low | 25000kcal (40kW) | |
| Fuel type | Diesel, Kerosene | |
| Fuel | High | 3.19 kg /hr |
| Fuel | Low | 3.32 kg /hr |
| Tank Capacity | 58 Liters | |
| Operating Time per Full tank | High |
15 Hours |
| Low | 20 Hours | |
| Power Source | 230v, 50Hz | |
| Power consumption | In ignition | 115 W |
| In operation High | 92 W | |
| Low | 86 W | |
| Noise Level (in operation) | High | 67 dB (A) |
| Low | 63 dB (A) | |
| External Dimension (H x W x D) | 970 x 645 x 1235 mm | |
| Dry Weight | 50 kg | |
| Safety Devices | Photocell flame monitor, 1,6A fuse, overheat protection, Tip-over switch, overvoltage detector. | |