| Necessary to build circular pillars, columns and special circular formworks. | |
| POLYGONAL STIRRUPS (OPTIONAL): Thanks to this special device for stirrups, polygonal stirrups can be made accurately and quickly, max. Ø 12 mm. |
|
Sima DEL 30/35/42/50 Electric Folding Machine
Benders designed for being used at Rebar Workshops as well as at Building Site.
Reversing device which enables the turning table rotations from
left to right and the other way around.
Millimetric adjustment of the bending angle placing small pins into the holes located around the turning table. At the table rotates the pins engage a limit switch and automatically returns to neutral.
- Emergency stop button and reversing device in case of misuse.
- Very easy electrical mechanisms.
- It does not assembled any expensive or problematic electrical chip-cards.
- Self fan coil cooled braking motor.
- Low tension transformer (24 Volt.) is assembled, which assures complete safety.
- Thermically treated bushes, tips and bending squares.
- Easy operating and high performance.
For more info and orders: Call Kaj Löfman +358 40 586 2081
| Model | DEL 30 | DEL 35 | DEL 42 | DEL 50/50 Tronic |
| R=450 Flat bar (mm) | 30 | 35 | 42 | 50 |
| R=450 Reinforced bar (mm) | 26 | 32 | 35 | 40 |
| R=650 Flat bar (mm) | 26 | 30 | 35 | 40 |
| R=650 Reinforced bar (mm) | 25 | 28 | 34 | 35 |
| Turns/ Minute | 12 | 10 | 8 | 6 |
| HP/ Breaking motor | 3 | 4 | 4 | 4 |
| Measurements (cm) | 120 x 80 x 105 | 120 x 80 x 105 | 120 x 90 x 107 | 120 x 89 x 110 |
| Weight (kg) | 312 | 354 | 560 | 569 |