| Cutter Wheel Drive System | The cutter wheel drive system eliminates the bottom drive-belt alignment. It reduces some routine maintenance as compared to complete belt-drive systems. A gearbox direct drive system offers an efficient transfer of hp from the engine to the cutter wheel. The upper and lower gearbox, as well as the driveshaft, is covered by a 3-yr/3000-hr limited warranty. |
| Electric Clutch Engagement | This design eliminates manual manipulation of a belt tensioner or engine slide adjustment to engage cutter wheel and extends life. |
| Operator Presence System | With this safety system, the cutter wheel will automatically stop when the operator releases the hydraulic cutter wheel controls. |
| Two-Speed Ground Drive | Allows operators to travel between stumps or from the trailer to the stump quickly while still giving them a slower controlled creep speed during operation. |
| Visibility | This design allows the operator to cut stumps located closer to buildings, sidewalks or other obstructions while reducing the number of "interference or hang-up" situations which commonly occur while cutting deep roots. |
| Optional AutoSweep | This feature is designed to reduce engine, drivetrain and structural stress. AutoSweep also eliminates some operator interface resulting in increased productivity. |
Vermeer SC372 Stump Cutter
Expect big results from this compact package.
The SC372 combines power and agility into one simple machine. At only 35" (88.9 cm) wide with dual tires removed, the SC372 can easily navigate through gates and operate in confined space; and it's so lightweight, your footprint won't be noticed.
The optional patented AutoSweep system monitors engine speed and automatically adjusts the cutter wheel sweep rate to maximize productivity and reduce premature wear.
For more info: Call Christopher Wegelius +358 40 501 9826
| General | ||
| Length | 124" | 315 cm |
| Width | 34.8" | 88.4 cm |
| Height in Transport | 59" | 149.9 cm |
| Gas Engine (2WD) | 1860 lbs | 843.7 kg |
| Diesel Engine (4WD and Blade) | 2270 lbs | 1029.7 kg |
| Main Frame | ||
| Frame Construction | Main frame is 1/4 inch Grade 50 plate | Main frame is 0.64 cm grade 50 plate |
| Steering Axle Type | Oscillating two wheel steering | |
| Cutter Wheel/Drive | ||
| Wheel Diameter | 18" | 46cm |
| Wheel Swing Arc | 40" | 102cm |
| Wheel Cut Above Ground | 22" | 56cm |
| Wheel Cut Below Ground | 14" | 36cm |
| Engine | ||
| Make and Model | Briggs and stratton Vanguard | Gasoline |
| Horsepower - Engine Option #1 | 35 hp | 26.1kW |
| type of fuel | Gasoline | |
| Ground Drive / Propel system | ||
| Drive type | Dual Drive Wheels (rubber tire) or 4WD Optional | |
| Options | ||
| 4 Wheel Drive | One motor for each drive wheel | All Wheel Drive |
| Push Blade (Hydraulic controlled) | 33" wide blade | 84cm wide blade |
| Engine Option 2 | ||
| Make and Model | Yanmar 3TNV88-BCVR | Diesel |
| Horsepower - Engine Option #2 | 37.8hp | 28.2 kW |