| Optional Loader | The optional loader can reduce the need for onsite support equipment. Also, the cab helps reduce operator fatigue and increase productivity. |
| Cab Door Interlock Safety Switch | Cab door must be closed and secure before loader boom and rotation is operational for protecting the operator in cab from flying debris. |
| Hydraulic Tub Drive Chain Tensioner | Reduces the amount of daily maintenance required with manual tensioner systems. |
| Thrown Object Restraint System (TORS) | This feature can help enhance overall jobsite safety. |
| Non-bridging Tub Design | Because of the size of the tub and the flare bottom, the hammermill processes material even with the vertical wall of the tub, reducing bridging and allowing steady feeding of material. |
| Duplex Drum | This patented design decreases daily maintenance while increasing the life of major wear components by being able to reverse the cutter blocks, hammers, and center section of drum. The "reverse helix" design improves cutting performance by moving material away from the tub wall for better distribution across the mill. |
| Engine Options | Contractors can choose from two engine options to better match the machine to the application. |
| Ground Clearance | The super singles provide floatation and ground clearance for easier transport and mobility on the jobsite. |
Vermeer TG5000 Tub Grinder
Innovation and Technology.
Building on more than a decade of grinder research and development, the Vermeer TG5000 tub grinder packages innovation and power for large land clearing projects and organic/wood waste processing applications.
A powerful CAT six-cylinder turbo-charged Tier 3 diesel engine provides exceptional power and fuel economy. The innovative tub design helps to reduce the change of material bridging and helps to increase productivity.
More info: Christopher Wegelius +358 40 501 9826
| General | ||
| Weight | 45000 lbs | 20411.7 kg |
| Length | 38.8 ' | 11.8 m |
| Height | 13.1 ' | 4 m |
| Width | 8.5 ' | 2.6 m |
| Weight w/ Loader | 62600 lbs | 28394.9 kg |
| Length w/ Loader | 45.1 ' | 13.7 m |
| Height w/ Loader | 13.5 ' | 4.1 m |
| fuel Tank Capacity | 195 gal | 738.2 L |
| Engine | ||
| Model Engine Option #1 | CAT C13 Tier III Turbo Charged After-Cooled | |
| Horsepower - Engine Option #1 | 440 hp | 328.1 kw |
| Fuel Consumption Rate | 22.6 gph | 85.6 lph |
| Number of Cylinders | 6 | |
| Operating Range | 8.6 hrs | |
| Engine 2 | ||
| Model Engine Option #2 | CAT C15 TeirIII Turbo Charged After-Cooled | |
| Horsepower - Engine Option #2 | 540 hp | 402.7 kw |
| Fuel Consumption Rate | 27 gph | 102.2 lph |
| Operating Range | 7.2 hrs | |
| Drum/Mill | ||
| Opening Length | 47.5 " | 120.7 cm |
| Drum/Mill Opening Width | 24.2 " | 61.5 cm |
| Screen Area | 1,357 sq. inches (ea) screen | 2,714 sq. inches combined |
| Drive Line | ||
| PTO | HPTO 12 hyd. acuated dry clutch (440hp non-loader) | HPTO 14 Wet Clutch (540hp models, 440hp loader) |
| Controls | ||
| Radio Remote | 50 Channel Wireless Radio Remote | Operating Range up to 300' |
| On-Machine Control Station | LED Display, Key, All Machine Controls | 121.9 cm |
| Tub | ||
| Loading Height | 10.6 ' | 3.2 m |
| Outside Tub Diameter (Top) | 12.25 ' | 3.7 m |
| Inside Diameter | 8 ' | 2.4 m |
| Tub Cover Available | Hydraulically Activated | Swings over Tub or Over Engine |
| Safety Features | ||
| TORS | Pivoting Tub Cover Assembly | Bolt-in Mill Deflector Plate |
| FOPS | Overhead and Side Protection at Control Panel | |
| Rear Discharge | ||
| Belt Design | Continuous Belt From Under Mill to Conveyor End |
|
| Width | 36 " | 91.4 cm |
| Discharge Height | 14 ' | 4.3 m |
| Hydraulics | ||
| Oil Tank Capacity | 95 gal | 359.6 L |
| Trailer | ||
| Axle Rating | 20,000 lb Capacity | 9072 kg |
| Loader | ||
| Reach | 27 ' | 8.2 m |
| Operating Height | 18.5 ' | 5.6 m |